Fix-A-Leak 8oz

Dose: 4oz per 950 litres

A concentrated, blended, proprietary formula.
Seals leaks in all types of materials.
Seals leaks in the walls, floor or shell.
Seals leaks in suction lines.
Works well, throughout the plumbing system.
Helps seal holes as large as 3mm (‚Öõ" in) diameter.
Forms a durable, long-lasting seal.

Shake well before using!
Bypass Filter or remove the filter cartridge, before adding FIX-A-LEAK to water.
With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
This product is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension every 4-6 hours, while maintaining the circulation.
Continue to recirculate water, until the leak has stopped.
After the leak has stopped, give it the proper time to cure (24-48 hours). Then, you may return to normal filtration.
Treatment can be repeated, if necessary.
Never allow filter cartridges to dry before they are cleaned. Rinse clean with water.
If your spa is a foam insulated type and has been leaking for a long period of time, it is advisable to drain your tub, after determining that the leak has stopped. Thoroughly, wipe down the spa with a soft, non-abrasive wet cloth. Allow to dry for 4-5 days, in order for the leak sealer to properly cure.